Avibank

Ball-Lok® Quick Release Pins

Marine Pin

Marine Pin

Configure Part Number

- - - - - -

DASH	NOM.	A	B	C	J	CALCULATED	PUSH PULL FORCE LBS.
NO.	DIA.	+.0000 / -.0030	MIN.	MAX.	MAX	DOUBLE SHEAR LBS.	MAX.	MIN.
3	3/16	0.1885	0.200	0.329	1.187	3¸900	9	1.5
4	1/4	0.2480	0.280	0.344	1.187	4¸500	9	2
5	5/16	0.3105	0.360	0.359	1.187	7¸100	14	6
6	3/8	0.3730	0.430	0.390	1.187	10¸300	14	6
7	7/16	0.4355	0.495	0.469	1.187	14¸100	17	8
8	1/2	0.4980	0.570	0.516	1.187	18¸400	22	10
9	9/16	0.5605	0.645	0.593	1.687	23¸400	22	10
10	5/8	0.6230	0.720	0.672	1.687	28¸900	30	15
12	3/4	0.7480	0.860	0.750	1.687	41¸800	30	15
14	7/8	0.8730	1.030	0.859	2.187	57¸000	35	20
16	1	0.9980	1.160	0.984	2.187	74¸600	40	20

ITEM NO.	PART NAME	MATERIAL	SPECIFICATION
1	BODY	CRES 300 SERIES	ASTM A581/582
2	BALLS	CRES 302 / 316	AMS-QQ-S-763
3	SPRING	CRES 17-7PH/302	AMS5678 / ASTM A313
4	ATTACHING RING	CRES 17-7PH/302	AMS5678 / ASTM A313

NOTES
1. PASSIVATE PER AMS2700
2. BALL HARDNESS HRC 25-39
3. HEAT TREAT CRES 17-7H TO CH900
4. NO. 3 DIAMETER PIN AVAILABLE WITH ONE BALL ONLY
5. BALLS MAY BE ROTATED TO POSITIONS OTHER THAN SHOWN
6. PUSH PULL FORCE BASED ON RECOMMENDED HOLE DIAMETER SHOWN ON PAGE 4¸ COLUMN C OF NAS618.
7. PARTS WILL BE IDENTIFIED WITH -AVK- AND APPROPRIATE PART NO.
8. IF GREATER -C- DIMENSION IS REQUIRED ADD LENGTHS IN TENTHS OF AN INCH AFTER LETTER -C-. EXAMPLE: 4D1.00C10 (C10 BEING 1.0 INCHES
9. VINYL COAT LANYARD CABLE PER MIL-I-631
10. LANYARD ASSEMBLY ATTACHED DIRECTLY TO THE RING: ASSEMBLY CONSISTS OF: 1/16 DIA. 7 X 7 CRES. CABLE PER MIL-DTL-83420. 2 - SWAGING SLEEVES (MS51844-62). 1 - TAB (CRES 302/304 PER ASTM A240 / AMS5513 / AMS5516)
11. PART TO BE PURCHASED IN 1/4 INCH INCREMENTS ONLY.

DASH	NOM.	A	B	C	D		E		F		G	H	CALCULATED
NO.	DIA.	+.0000 / -.0015	+/- .005	MAX	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	DOUBLE SHEAR LBS.
3	3/16	0.1885	0.220	0.260	.310	.250	.500	.380	.820	.680	0.85	0.36	4¸600
4	1/4	0.2485	0.289	0.290	.310	.250	.500	.380	.820	.680	0.85	0.36	8¸200
5	5/16	0.3110	0.375	0.330	.310	.250	.500	.380	.820	.680	0.90	0.39	12¸800
6	3/8	0.3735	0.440	0.365	.390	.300	.560	.440	1.070	.720	0.95	0.44	18¸400
7	7/16	0.4360	0.509	0.380	.390	.300	.660	.540	1.070	.930	1.10	0.52	25¸000
8	1/2	0.4985	0.594	0.460	.565	.430	.710	.590	1.070	.930	1.17	0.66	32¸800
9	9/16	0.5610	0.666	0.510	.565	.430	.810	.690	1.320	1.180	1.56	0.88	41¸200
10	5/8	0.6235	0.750	0.580	.580	.450	.870	.750	1.450	1.310	1.60	0.88	51¸200
12	3/4	0.7485	0.887	0.670	.700	.570	1.000	.880	1.450	1.310	1.82	1.17	73¸600
14	7/8	0.8735	1.046	0.760	.840	.695	1.060	.940	1.570	1.400	2.10	1.25	100¸000
16	1	0.9985	1.219	0.890	.950	.745	1.120	1.060	1.570	1.400	2.17	1.34	131¸000

ITEM NO.	PART NAME	MATERIAL	SPECIFICATION
1	BODY	CRES 17-4PH	AMS5643
2	SPINDLE	CRES 17-4PH	AMS5643
3	BUTTON	CRES 300 SERIES	ASTM A581/582
4	SPRING	CRES 17-7PH/302	AMS5678 / ASTM A313
5	HEAD	CRES 300 SERIES	ASTM A581/582 / ASTM A240 / ASTM A666
6	BALLS	CRES 302/316	AMS-QQ-S-763 / ASTM A276 / AMS5648

NOTES
1. HEAT TREAT CRES 17-4PH TO 190 KSI MIN.
2. BALL HARDNESS HRC 25-39
3. PASSIVATE PER AMS2700
4. HEAT TREAT CRES 17-7H TO CH900
5. VINYL COAT LANYARD CABLE PER MIL-I-631
6. IF GREATER -C- DIMENSION IS REQUIRED ADD LENGTHS IN TENTHS OF AN INCH AFTER LETTER -C-. EXAMPLE: 4M1.00C10 (C10 BEING 1.0 INCHES)
7. IF A FOUR BALL PIN IS REQUIRED FOR GREATER TENSION STRENGTH¸ ADD SUFFIX -F- TO STANDARD CALLOUT. EXAMPLE: 4M1.00F (-F- BEING FOUR BALLS)
8. BALLS MAY BE ROTATED TO POSITIONS OTHER THAN SHOWN
9. PARTS WILL BE IDENTIFIED WITH -AVIBANK- AND APPROPRIATE PART NO.
10. LANYARD ASSEMBLY ATTACHED DIRECTLY TO THE HEAD: ASSEMBLY CONSISTS OF: 1/16 DIA. 7 X 7 CRES CABLE PER MIL-DTL-83420. 2 - SWAGING SLEEVES (MS51844-62). 1 - TAB (CRES 302 / 304 PER ASTM A240 / AMS5516 / AMS5513)
11. PART TO BE PURCHASED IN 1/4 INCH INCREMENTS ONLY.

DASH	NOM.	A	B	C	D		E		F		G	H	J	CALCULATED
NO.	DIA.	+.0000 / -.0015	+/- .005	MAX	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MAX.	MIN.	MIN	DOUBLE SHEAR LBS.
3	3/16	0.1885	0.220	0.260	0.310	0.250	0.530	0.310	1.300	1.060	1.450	.730	.080	4¸600
4	1/4	0.2485	0.289	0.290	0.310	0.250	0.530	0.310	1.300	1.060	1.500	.780	.080	8¸200
5	5/16	0.3110	0.375	0.330	0.310	0.250	0.590	0.410	1.300	1.060	1.650	.830	.080	12¸800
6	3/8	0.3735	0.440	0.365	0.390	0.300	0.650	0.450	1.370	1.060	1.650	.940	.080	18¸400
7	7/16	0.4360	0.509	0.380	0.390	0.300	0.710	0.550	1.520	1.090	1.850	.980	.080	25¸000
8	1/2	0.4985	0.594	0.460	0.565	0.435	0.800	0.600	1.610	1.160	1.850	1.140	.080	32¸800
9	9/16	0.5610	0.666	0.510	0.565	0.435	0.840	0.680	1.640	1.160	2.030	1.140	.080	41¸200
10	5/8	0.6235	0.750	0.580	0.580	0.450	0.905	0.750	1.700	1.240	2.250	1.400	.120	51¸200
12	3/4	0.7485	0.887	0.670	0.700	0.570	1.045	0.865	2.000	1.640	2.650	1.625	.120	73¸600
14	7/8	0.8735	1.046	0.760	0.840	0.700	1.235	0.980	2.180	1.640	3.000	1.875	.120	100¸000
16	1	0.9985	1.219	0.890	0.950	0.750	1.330	1.175	2.280	1.640	3.100	2.000	.120	131¸000

ITEM NO.	PART NAME	MATERIAL	SPECIFICATION
1	BODY	CRES 17-4PH	AMS5643
2	SPINDLE	CRES 17-4PH	AMS5643
3	BUTTON	CRES 300 SERIES	ASTM A581/582
4	SPRING	CRES 17-7PH/302	AMS5678 / ASTM A313
5	HANDLE	CRES 300 SERIES	ASTM A581/582
6	HANDLE RING	CRES 302	ASM A313
7	BALLS	CRES 302 / 316	AMS-QQ-S-763

NOTES
1. HEAT TREAT CRES 17-4PH TO 190 KSI MIN.
2. BALL HARDNESS HRC 25-39
3. PASSIVATE PER AMS2700
4. HEAT TREAT CRES 17-7H TO CH900
5. VINYL COAT LANYARD CABLE PER MIL-I-631
6. IF GREATER -C- DIMENSION IS REQUIRED ADD LENGTHS IN TENTHS OF AN INCH AFTER LETTER -C-. EXAMPLE: 4R1.00C10 (C10 BEING 1.0 INCHES)
7. IF A FOUR BALL PIN IS REQUIRED FOR GREATER TENSION STRENGTH¸ ADD SUFFIX -F- TO STANDARD CALLOUT. EXAMPLE: 4R1.00F (-F- BEING FOUR BALLS)
8. BALLS MAY BE ROTATED TO POSITIONS OTHER THAN SHOWN
9. PARTS WILL BE IDENTIFIED WITH -AVIBANK- AND APPROPRIATE PART NO.
10. LANYARD ASSEMBLY ATTACHED DIRECTLY TO THE HEAD: ASSEMBLY CONSISTS OF: 1/16 DIA. 7 X 7 CRES CABLE PER MIL-DTL-83420. 2 - SWAGING SLEEVES (MS51844-62). 1 - TAB (CRES 302 / 304 PER ASTM A240 / AMS5516 / AMS5513)
11. PART TO BE PURCHASED IN 1/4 INCH INCREMENTS ONLY.

TAB HOLE SIZE
DASH NO.	T DIA. +.004/-.001
-4	.129
-6	.194
-7	.255
-8	.281
-10	.318
-12	.377

Marine Pin Lanyards

NOTES
CABLE:	SIZE 1/16 DIAMETER. 7 X 7 CORROSION RESISTANT STEEL PER MIL-DTL-83420. VINYL COATED - COLOR GREEN
	PER MIL-I-631. RATED FULL STRENGTH: 480 LBS. SWAGING SLEEVE: MS51844-62 OR SIMILAR
TAB:	C - CORROSION RESISTANT STEEL PER ASTM A240 / AMS5513 / AMS5516
FINISH:	ALL CRES PARTS PASSIVATED PER AMS2700

© 2024 Precision Castparts Corp.

Accept Cookies

This website uses cookies. By clicking "Accept Cookies," you agree to our use of non-essential cookies on this site. Learn More